Individual HPLC Components and Accessories
MilliporeSigma™ Supelco™ LC-MS Post column Flow Splitters, Fixed
Accessory for LC
MilliporeSigma™ Supelco™ column Blank Kit for HPLC
Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.
MilliporeSigma™ Supelco™ Rheodyne™ Model 7000L Stream Switching Valve, Large Bore
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold
The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.
Thermo Scientific™ Rheodyne™ Suction Needle Adapter
Enable suction loading of Thermo Scientific™ Rheodyne™ 9725 and 9725i Sample Injectors for HPLC with this adapter.
MilliporeSigma™ Supelco™ Cap for Narrow-Mouth Bottle
Number of Holes: 3
MilliporeSigma™ Supelco™ Micro-Splitter Valves
Available in High and Low Pressure options
MilliporeSigma™ Supelco™ PHRED Photochemical Reactor
PHRED photochemical reactor can be used effectively to improve analyte detection in the presence of interfering matrix components, or when the analytes are present at low concentrations.
Thermo Scientific™ Rheodyne™ 9725 and 9725i Sample Injectors
Ensure precise HPLC injections and protect against pressure shock with biocompatible dual-mode Thermo Scientific™ Rheodyne™ 9725 and 9725i Sample Injections.
DWK Life Sciences Kontes™ Straight with Tip-O-Ring PTFE Plug HI-VAC Valves, 0-4mm bore range; 9mm stem O.D.; 010 o-ring size shaft; 5-105 o-ring size tip
For vacuum applications up to 5 x 10-7 torr
MilliporeSigma™ Supelco™ RheBuild™ Kit
Kits include all of the tools and parts you need to repair your SupelPRO unit. The parts included are those most likely to be damaged, worn, or lost. Parts may vary, depending on valve model.
MilliporeSigma™ Supelco™ OPTI-SEAL Pump Seal
OPTI-SEAL pump seals are made from an inert, ultra-high molecular weight polyethylene material (UHMW-PE). Relative to conventional polytetrafluoroethylene (PTFE) seals, these seals show less particle shedding. This reduces the potential for clogged frits, resulting in the prevention of unscheduled system downtime.